DIGITALCONTROLINCORPORATED
22 DigiTrak Falcon F1™ Operator's Manual
1. Pitch assumed zero
Above Ground Range (AGR)
If you just completed AGR after calibration, don't forget to turn Height-
Above-Ground (HAG) back on, if necessary.
Height-Above-Ground (HAG)
Page16
50 Foot Calibration (Optional)
This feature is primarily used for demonstrations of the guidance system above ground and is not necessary
for drilling. Above ground range (AGR) measurements beyond 40ft. often read shallower (shorter) than they
actually are due to variations in ground conditions, and this feature calibrates these measurements to
account for these variations. Using this feature is substantially similar to the procedure described for 1 pt
calibration; if you require further information, please contact DCI customer service.
Settings
Use this menu to set the following options:
1. Depth Units Menu
2. Pitch Units Menu
3. Roll Offset Menu
4. Transmitter Options Menu
5. System Timer Menu
6. Telemetry Channel Menu
7. Bubble Level
8. Signal Strength Values
9. Page 2
Settings Menu
To Next Page
Loading...