Digittrade HS256S - 6. Initialising; partitioning and formatting with Windows

English
70
Follow these steps to initialize the HS256S with Windows:
- Enter disk management. For this right-click on my computer and then click on
manage. In Windows Vista or 7 click start, then right-click on my computer,
choose manage and then click on Disk Management from the list.
Here you will find an overview of the different drives:
- After successfully initialising the HS256S will be shown in the bottom area of
the disk management window:
- If the disk management is open the first time since the HS256S was
started following window will pop-up:
6. Initialising / partitioning and formatting with
Windows