English
80
- In this window you configure all features of the partition. You can choose
between different file systems and sizes and if necessary you can configure a
mountingpoint for Linux.
- Confirm your configuration with “OK”.
- Formatting works similarly. Choose the desired partition and click on “Edit”.
- Tick on “Formatting” and choose the adequate file system.
Confirm your configurations with “OK”.
- Click on “Apply” to operate your modifications.
- All modifications will be shown in a new window. Make sure all the
modifications are correct and confirm the configurations by clicking on “Apply”.
Note: If you are not sure which file system or partition size to choose, we recom-
mend taking the automatically entered values.
To Next Page
Loading...
Need help?
General
