When the computer has rebooted, plug in the device. If the device is installed properly,
you will see entries in the /dev directory:
/dev/cu.usbserial-xxxxxxxx
/dev/tty.usbserial-xxxxxxxx
where xxxxxxxx is either the device's serial number or, for unserialized devices, a
location string that depends on which USB port your device is connected to. Note that for
FT2232C devices port A is denoted by the serial number appended with "A" and port B is
designated by the serial number appended with "B"./dev can be accessed through the
Terminal application. The Terminal application can be launched by selecting Go >
Applications > Utilities > Terminal. Type the following lines in the Terminal
window to produce the file list:
cd /dev
ls-l
If you run the application System Preferences and select Network (Go > Applications >
System Preferences > Network), you should see the text "New Port Detected".
Click OK and select Network Port Configurations from the Show list. The new port can be
To Next Page
Loading...
