Digitus DA-90433 - Step 5: Install the Tabletop, Handset, Control Box and Adapter; Step 6: Connect Cables to the Control Box

8
Step 5: Install the tabletop, handset, control box and adapter:
Insert
• Fix the tabletop with screws (F), and then to fix the control box (9) on the
tabletop with screws (F). The handset (10) is fixed on the tabletop with self-
owned screw and insert the adapter into the adapter arm.
Step 6: Connect cables to the control box:
Tear off Manage cables Fix cables
• Fix the cables to the tabletop with cable management (E), and then use
screw (D) to fix the cable management (E) to keep the desk cables
organized.