26
1024 ~ 65535 in this field. When you connect to
this IP camera next time, you have to add a
colon and port number after IP camera’s IP
address. For example, if the camera’s IP
address is 192.168.2.3 and HTTP port number
is 82, you have to input ‘http://192.168.2.3:82’
in web browser’s address bar.
DHCP: IP camera will obtain IP address from
DHCP server on your local area network
automatically.
PPPoE: IP camera will connect to network by
PPPoE.
Please input PPPoE user name and password, and
input MTU value when required.
Please note: In some cases you can improve
network efficiency or correct connection problem
by setting a new MTU value, however, In most
cases you don’t have to change MTU setting.
Click ‘Apply’ button to save changes you made.
To Next Page
Loading...
