31
You can also setup encrypted wireless connection by WPS (Wi-Fi
Protected Setup):
The descriptions of these items are listed below:
Item Description
Self PinCode Displays the 8-digit pin code of this IP
camera. Write this number down and you’ll
need this number so get connected with other
WPS-enabled network devices when
requested.
Configure via
Push Button
Click ‘Start PBC’ button to start PBC-style
WPS pairing sequence: Click this button, and
push WPS button of the access point (or click
a software button in access point’s
configuration web page).
You must press WPS button of the wireless
device you wish to connect within 120
seconds.
Configure via
PinCode
Click ‘Start PIN’ to start PIN-style WPS
pairing sequence. You have to input WPS
registrar’s SSID in ‘Registrar SSID’ field first.
Click ‘Apply’ button to save changes you made.
To Next Page
Loading...
