49
The descriptions of these items are listed below:
Item Description
FTP Server Input the IP address or host name of the FTP
server.
User Name Input the user name required by FTP server.
Password Input the password of FTP server.
Port Input the port number of FTP server, this
should an integer between 1 to 65535.
Please don’t change this value until
instructed by FTP server’s administrator.
Path Input the path (folder) you wish to save
snapshot file on FTP server. If you don’t want
to specify folder, you can leave this field
blank, and snapshot files will be saved in the
default folder when logged onto FTP server.
Passive mode Default setting is ‘Enable’ (use passive
mode). If the FTP server you’re going to use
does not support passive mode (using active
mode), select ‘Disable’ here.
Click ‘Apply’ button to save changes you made. You can also click
‘Send a test file’ button to upload a test file to FTP server, and a
message box will appear to indicate if the FTP upload is successful,
so you can examine if the parameters you set in this page are correct.
To Next Page
Loading...
