56
Restore Config Click ‘Browse’ button to select a
previously-saved configuration file on your
computer’s hard drive, and then click ‘Apply’
to upload the configuration file.
Reboot Now Click this button to reboot IP camera. This
function is useful when you think IP camera is
not working properly.
Reset to default Reset the IP camera’s setting back to default
value. There are 2 options:
1) Keep Network Setting: Reset all settings
back to default value, except network
settings. You can still use the same IP
address to connect to the IP camera.
2) Factory Default: Reset all settings, include
network settings. Please reconnect to IP
camera by its default IP address:
192.168.2.3
Click ‘Apply’ to reset. You can press and hold
‘WPS / Reset’ button for more than 10
seconds to reset IP camera’s setting to
default value.
To Next Page
Loading...
