78
You can put the mouse cursor on a certain component and see its
button name, and here’re detailed descriptions of all buttons:
Item Description
Video
displaying
area
The image of all connected cameras will be
displayed here.
Language Select a language from this dropdown menu to
change display language.
Display layout
Change camera image display layout (Click a
layout icon to change camera display layout).
There are 8 kinds of available display layouts.
Full screen
Click this button to switch to full screen mode
(only display all camera’s image), press ‘ESC’
key to quit full screen mode.
Scan
Click this button and the IP camera surveillance
software will switch displaying the image of all
connected camera automatically. Click this
button once to activate scan function (scan icon
will become blue
), click again to stop
scanning (scan icon will become white
).
Zoom out
Zoom-out (To see more objects).
This function is only available for supported
cameras.
Zoom In
Zoom-in (Too see more details).
This function is only available for supported
cameras.
PTZ control
There are 8 directions in PTZ control ring. If the
camera you connect support PTZ, you can use
PTZ control ring to change the direction that
camera points to.
This function is only available for supported
cameras.
Home
Click this button to return the camera to ‘Home’
(default) position.
This function is only available for supported
cameras.
To Next Page
Loading...
