82
Name* Input the name of camera here. Default value is
the first 6 bytes of camera’s MAC address, you
can change the name of camera so you can
remember the camera’s location of purpose
easily.
Model Displays the model of selected camera, this field
can not be changed.
IP* Input the IP address of camera.
Username* Input the user name of camera.
Web Port* Input the web port of the camera. By default it’s
‘80’.
Password Input the password of camera. Default value is
‘1234’. You should change the password if you
changed the password of selected camera.
Video
Format**
Select the video encoding format of this camera
(MJPEG or MPEG4).
Reset Clear all fields in ‘Camera Configuration’ section.
OK Save settings in this tab.
Cancel Discard all settings in this tab.
*: It’s recommended to use ‘Select’ button to fill the content of this
field.
**: Only available for cameras support this function.
To Next Page
Loading...
