8
4. NETWORK CONFIGURATIONS
Note: Network configurations may require a person who has advanced network knowledge. It’s recommended to
check with your installer for this service if possible.
4.1 Understand How Your Laptop / Computer Connect to Internet
Then, connect your NVR directly to your router / hub / modem with a network cable, and power it on.
If you’re using:
Router + modem, please refer to “4.2 Router + Modem”.
Modem or modem + hub, please refer to “4.3 Modem / Hub + Modem”.
4.2 Router + Modem
Before configuring, make sure:
Your laptop / PC is connected to the same router as the NVR is intended to connect to.
You know the IP address, user name and password to access your router.
The DHCP function of your router is on.
Note: For details, please refer to the user manual of your router.
Step1: Connect your NVR to the router with a RJ45 network cable, similar as follows:
To Next Page
Loading...