Safety Warning
1. The UPS utilizes voltages that may be hazardous. Do not
attempt to disassemble the unit. The unit contains no user
serviceable parts. Only factory service personnel may perform
repairs.
2. Internal battery voltage is 12Vdc. sealed, lead-acid, 6 cells
battery.
3. Connection to any other type of receptacle other than a
two-pole, three-wire grounded receptacle may result in shock
hazard as well as violating to local electrical codes.
4. In the event of an emergency, press the OFF button and
disconnect the power cord from the AC power supply to properly
disable the UPS.
5. Do not allow liquids or any external objects to enter the UPS. Do
not place beverages or any other liquid-containing vessels on or
near the unit.
6. This unit is designed for installation in a controlled environment
(temperature controlled, indoor are free of conductive
contaminants). Avoid installing the UPS in locations where there
is static or flowing water, or excessive humidity.
7. Do not plug the UPS input into its own output.
8. Do not attach a power strip or surge suppressor to the UPS.
9. Do not connect non-computer-related items, such as medical
equipment, life-support equipment, microwave ovens, or
vacuum cleaners to UPS.
10. To reduce the risk of overheating the UPS, do not cover the UPS
cooling vents and avoid exposing the unit to direct sunlight or
installing the unit near heat emitting appliance such as air
heaters or furnaces.
11. Unplug the UPS prior to cleaning and do not use liquid or spray
detergent.
12. Do not dispose the batteries into fire as they may explode.
13. Do not open or mutilate the battery or batteries. Released
electrolyte is harmful to the skin and eyes. It may be toxic.
14. A battery can present a risk of electrical shock and high short
circuit current. The following precautions should be observed
when working on batteries:
To Next Page
Loading...
Need help?
General
