6
Installation requirements:
• Avoid direct sunlight, away from the heat source or
strong electromagnetic interference.
• Check cable and connector according to reasonable
configuration requirements, the cable (<100m)
• The product does not provide installation component:
screws, nuts, and other installation tools.
• Power requirements: PD voltage input range 36~57V,
power 60W
• Working temperature of -40°C ~ 75 °C, relative humidity
is 5% ~ 95%
6.3 Installation
This section describes how to install the Gigabit PoE switch
and make connections to it, please read the following topics,
and perform the procedures in the order being presented.
DIN-rail mounting
Adopt the 45mm standard DIN card rail type installation,
check whether the DIN-rail rail mounting tool accessories
(this product has supplied installation fittings) check whether
the DIN rail is firm.
To Next Page
Loading...
