GIGABIT PoE+ EXTENDER
Manual
DN-95123
Description
Ethernet and PoE connections both restrict cable distances to 100 meters between
network ports. To overcome this distance limit, network installers can simply connect
a PoE Extender in-line with the Cat-5e or Cat-6 cable.
With PoE Extender, PDs (such as IP Security Cameras, VoIP telephones, and wireless
access points) can be installed at greater distances than 100 meters from another. By
connecting PoE Extender for every extra 100 meters of cable, both Ethernet and PoE
can be extended to 200 meters, 300 meters, or even greater distances, depending on
PDs power required and power source.
PoE Extender does not require any additional power supply and the connected PDs is
fed by a single PoE switch or mid-span, which simplifies installation. PoE Extender
offers two Ethernet ports, which are both configured automatically for link speed,
duplex and crossover and the full-rate network throughput is main-tained.
To Next Page
Need help?
General
