Need help?Do you have a question about the Digitus DS-55100-1 and is the answer not in the manual?
General| HDMI in | 1 |
|---|---|
| DC-in jack | Yes |
| Number of HDMI outputs | 2 |
| Connectivity technology | Wired |
| Type | AV transmitter & receiver |
| Material | Metal |
| Color depth | 8 bit |
| Product color | Black |
| Maximum resolution | 1920 x 1080 pixels |
| Maximum refresh rate | 60 Hz |
| Cable types supported | Cat6, Cat6a, Cat7 |
| Supported video modes | 1080p |
| Maximum transfer distance | 50 m |
| Package depth | 200 mm |
| Package width | 150 mm |
| Package height | 80 mm |
| Package weight | 1150 g |
| Package volume | 2400 cm³ |
| Country of origin | China |
| UK Trade Tariff code | 85176200 |
| Master (outer) case width | 315 mm |
| Master (outer) case height | 420 mm |
| Master (outer) case length | 425 mm |
| Master (outer) case volume | 56227 cm³ |
| Master (outer) case weight | 11500 g |
Weight and Dimensions| Receiver dimensions (WxDxH) | 67 x 72 x 23 mm |
|---|
Extends HDMI cable length up to 50m using a standard network cable.
Supports the highest video resolution of 1080p at 60 Hz.
Compatible with CAT 6, CAT 6A, and CAT 7 network cables.
EDID switch allows setting resolution and audio format on the transmitter.
HDMI Loop Out port connects a local monitor to the transmitter unit.
Supports Power over Ethernet (PoE), eliminating the need for receiver power supply.
Supports uncompressed audio signals, including LPCM.
Features a compact size for simple use and installation.
Details the physical ports and indicators on the Transmitter (TX) unit.
Details the physical ports and indicators on the Receiver (RX) unit.
Table detailing switch settings for various EDID information outputs.
Instructions for setting source device resolution and saving EDID information.
To Next Page
