DIGITUS POE Web Smart Ethernet Switch
31
VLAN Striding
By selecting this function, switch will forward unicast packets to destination port, no matter
whether destination port is in the same VLAN.
IGMP Snooping V1 & V2
This function is enabled for supporting IGMPv1, IPMPv2 protocol to create IGMP group.
Uplink port
This function allows different VLAN use their individual uplink port to forward packets. In a
normal application, "only one" uplink port can be selected in a switch.
4.13 SNMP Settings
SNMP(Simple Network Management Protocol), used to manage the communication line.
You can Enable or Disable SNMP Settings here.
4.14 Logout
Press “Logout” button to logout web page.
→
To Next Page
Loading...
