HDMI Extender by Cat5 x1 User’s guide
1, First check product packaging, including：Main unit Sender and Receiver,
Two pieces of 5VDC Power Supply, User’s manual， Four mounting brackets
and eight screws；other devices should be prepared：HDMI source, Two HDMI
Cables AM to AM, CAT-5e cable, HDTV.
2, Connect the one power adapter to the Sender and the other to the Receiver.
If no problem, the power indicator will glow red light.
3, Connect the HDMI input source (such as HD-DVD, PS3, STB ) to the
Sender.
To Next Page
