Safety Precautions
48
After the product gets wet
After the product gets wet, drain water, and wipe the main unit
with a clean dry cloth.
In cold climates, water on the product may turn to frost. Using
the product with frost may cause a fault. Do not leave the
product with water droplets on it. (The product has no special
measures taken against condensation.)
Rubber seals
The rubber seals around the earphone microphone terminal
cover, external connection terminal cover, and card slot cover
help keep the product waterproof. Do not damage or remove the
rubber seals.
When closing the earphone microphone terminal cover, external
connection terminal cover, or card slot cover, take care not to get
the rubber seals caught. Forcibly closing the cover with the rubber
seals caught may damage them resulting in loss of waterproof
property. Just a small particle (a hair, a grain of sand, etc.) on the
seals can cause water leak.
If any liquid other than plain water (e.g. alcohol) gets on the
rubber seals, it may cause deterioration in durability.
Do not insert sharp objects into the gaps around the earphone
microphone terminal cover, external connection terminal cover,
or card slot cover. Doing so might damage or deform the
product or damage the rubber seals, causing water leak.
It is recommended to replace the parts for maintaining waterproof
property once every two years regardless of whether any
abnormality is present. For information on part replacement,
contact an au shop near you.
Speaker and microphone meshes
Repeatedly washing the product may cause the speaker
and microphone meshes to become clogged with hand soap
ingredients, reducing the sound quality of the ringtone and voices
on the phone. It is recommended to replace the parts used to
maintain the performance of the product every two years, even
if the product is operating properly. For information on part
replacement, contact an au shop near you.
Charging
Never charge the battery if the product is wet.
The optional accessories are not waterproof.
Waterproof property
Do not use the product in places where it may be sprayed with
high-pressure water (e.g. near a faucet or shower head) or
submerge it in water for extended periods of time, as the product
is not designed to withstand high water pressure.
Also, do not
expose the product to a strong flow of water running at the
specified rate (6 liters per minute) or more - a flow of water
that is strong enough to cause skin pain (for example,
when running from a faucet or shower head).
Doing so may
cause the product to fail, although it has a waterproof property
equivalent to IPX5. Do not wash the product in a washing machine
or ultrasonic bath.
The product does not float on water.
Heat resistance
Do not expose the product to boiling water or hot air
(from drying machines, hairdryers, fan heaters, or other
appliances). Also, do not use the product in saunas.
The
product is not heat resistant.
To Next Page
Loading...
