Digoo DG-PC809 - Page 23

20
specified below.The customer or the user of the Infrared Thermometer should
assure that it is used in such an environment.
Emissions
test
Compliance Electromagnetic environment-guidance
RF emissions
CISPR 11
Group 1
The Infrared Thermometer uses RF energy
only for its internal function.Therefore,its RF
emissions are very low and not likely to
cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B
The Infrared Thermometer is suitable for use
in all establishments,including domestic
establishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
domestic purposes.
Guidance and manufacture’s declaration-electromagneticimmunity-for
all EQUIPMENT and SYSTEMS
Guidance and manufacturer’s declaration-electromagnetic immunity
The Infrared Thermometer is intended for use in the electromagnetic environment
specified below.The customer or the user of the Infrared Thermometer is should
assure that it is used in such an environment.
Immunity test
IEC 60601
test level
Compliance
level
Electromagnetic
environment-guidance
Electrostatic
discharge
(ESD)
IEC 61000-4-2
±6KV contact
±8KV air
±6KV contact
±8KV air
Floors should be
wood,concrete or ceramic
tile.If
floors are covered with
synthetic material,the relative
humidity should be at least
30%.
Power
frequency
(50/60 Hz)
magnetic
field
IEC 61000-4-8
3 A/m 3 A/m
Power frequency magnetic
fields should be at levels
characteristic of a typical
location in a typical
commercial or hospital
environment.