23
of transmitter
W
For transmitters rated at a maximum output power not listed above,the
recommended separation distance d in metres (m) can be estimated using the
equation applicable to the frequency of the transmitter,where P is the maximum
output power rating of the transmitter in watts(W) according to the transmitter
manufacturer.
NOTE 1 At 80 MHz and 800 MHz,the separation distance for the higher
frequency range applies.
NOTE 2 These guidelines may not apply in all situations.Electromagnetic
propagation is affected by absorption and reflection from structures,objects and
15. Information statement
P
V
d
=
1
5.3
P
E
d
=
1
5.3
P
E
d
=
1
7
This guide is for reference only and does not constitute any form of warranty.
If you have any questions, please browse https://www.mydigoo.com/ for
more informations.
Made in China