Need help?Do you have a question about the Diivoo WT-01 and is the answer not in the manual?
Configure the current time, including hour, minute, and day of the week.
Set the desired time for the watering program to begin.
Specify the time when the watering program should conclude.
Define the duration for each watering cycle, from 1 minute to 23 hours.
Select the frequency of watering, ranging from minutes to hours.
Choose specific days of the week for the watering program to run.
Activate the timer to run programs automatically based on set schedules.
Turn off the timer, saving all programs and stopping operation.
Initiate a watering cycle manually, overriding programmed schedules.
Temporarily suspend watering programs for a set period due to rain.
Activate a lock to prevent accidental changes to the timer settings.
To Next Page
General
