Doc. No: FRM.65 Rev. No: 00 Rev. Date: 01.06.2015
1
1. SAFETY TERMS
The signal terms DANGER, CAUTION and NOTICE are used in this operating manual in the event of notices related
special dangers, or for unusual information, requiring a special marking.
Danger infers that there is the danger of life and considerable damage in the event of non-compliance.
Caution infers that there is the danger of injuries and damage in the event of non-compliance.
Notice infers that attention is drawn to technical correlations/connections.
2. TECHNICAL FEATURES
Standard: DIN 86251, DIN86252, DIN 86260, DIN 86261, EN 13709, DIN 3356
Face to Face: Straight Form - EN 558 Series 1 (DIN 3202 F1) / Angle Form - EN 558 Series 8 (DIN 3202
F32)
Flange Dimension: EN 1092-1, EN 1092-2, EN 1092-3
Material: Cast Iron, Ductile Iron, Cast Steel, Stainless Steel, Bronze
Type: Stop Type, SDNR Type, Regulating Disc, Bypass Disc
Application: Steam, fresh water, air, oil, seawater, feed water, cold and hot water, gases
Operation: Manual by handwheel (Option: Electric, Pneumatic, Hydraulic Actuator)
Pressure & Temperature Ranges
To Next Page
Loading...