6
EDjunior Dynamometer User’s Manual
On/Off key Use this key to turn the unit on and off.
ZERO key Use this key to zero the force indicated
on the display.
ESC key Use this key to escape from portions of
the menu structure and return to previ-
ous choices or displays.
Arrow key Use this key to access any available soft
keys not currently viewed.
If lift hardware (shackles,
chains, beams, hoppers, etc.)
is used to support the load and
zeroed prior to lifting the
current load being displayed,
you can press the ZERO key
for five seconds, the display
will show the total load being
lifted based on the zero point
used in calibrating the EDjr.
To Next Page
Loading...
Need help?
General
