Advanced Force Gauge User’s Manual
12
Factory Default
The AFG has a display backlight that can be turned
on at powerup. Press and hold UNITS while powering
up the AFG with the key. The backlight is now
operating.
Please note that battery consumption is doubled when
using the backlight. For this reason the backlight
setting is not remembered after power down.
An Auto-off feature can be enabled to conserve
battery power where the gauge powers down after 2
minutes since the last key press.
Press and hold ZERO while powering up the AFG with
the key. The symbol Ao will appear in the display
to indicate Auto-off is active. This feature is remem-
bered after power down.
The display may be inverted or “reversed”, so that the
operator can read it more comfortably. Press and hold
the MAX key while powering up the AFG with the
key to invert the display. This feature is remembered
after power down.
The AFG may be returned to its original factory default
settings, shown in the Advanced Menu Options
section of this manual.
Press and hold the RESET key while powering up the
AFG with
the key.
Auto-off
Backlit Display
Optional Settings
Invert Display
To Next Page
Loading...
Need help?
General