What to do if my diLUSSO FS909G5CSD cannot be powered on?
If your diLUSSO Oven isn't powering on, first turn off the main switch and check if the socket has power. If the socket is without power, contact an electrician. If the socket has power, it's recommended to call an authorized representative to inspect the oven.
Why is the burner not lighting on my diLUSSO Oven when the spark ignition is working?
If your diLUSSO Oven burner isn't lighting even though the spark ignition is working, there could be a few reasons: * The gas supply might be off. Check the gas supply valve to ensure it's open. * The burner might not be aligned properly. Try removing and refitting the burner. * The burner ports could be blocked. In this case, remove, clean, and replace the burner.
How to fix no spark when pressing the gas control knob on diLUSSO FS909G5CSD Oven?
If you're not getting a spark when you press the gas control knob on your diLUSSO Oven, it could be due to: * No power. Ensure the oven is plugged in and switched on, and check the mains circuit breaker. * The burner might not be aligned properly. Try removing and refitting the burner. For a loose sparker cable, it's best to call an authorized representative.
What to do if burner goes out when control knob released on diLUSSO Oven?
If the burner on your diLUSSO Oven goes out when you release the control knob, it could be because the flame safeguard isn't activated. Try re-lighting the burner and allowing more time for the flame safeguard to activate. If the issue persists, it may be due to a faulty connection or a broken flame safeguard, in which case you should call an authorized representative.
Why is there an uneven flame pattern on my diLUSSO FS909G5CSD Oven?
An uneven flame pattern or slight flame lifting on your diLUSSO Oven could be due to blocked burner ports. Try removing, cleaning, and replacing the burner to resolve this issue.
What causes the flame to be too high at minimum setting on diLUSSO FS909G5CSD Oven?
If the flame is too high at the minimum setting on your diLUSSO Oven, the turndown control setting might be incorrect. It's recommended to call an authorized representative to address this.
Why is the flame small on High setting on my diLUSSO FS909G5CSD?
If you're experiencing a small flame on the High setting of your diLUSSO Oven, there are several potential causes that require professional assistance. These include a faulty regulator, low gas supply pressure, an incorrect injector, or a blocked injector or gas supply tube. Additionally, ensure you are using the correct utensil size by referring to the operating instructions.
Why is the flame too high on High setting on my diLUSSO FS909G5CSD Oven?
If the flame is too high on the High setting of your diLUSSO Oven, it could be due to a faulty regulator or an incorrect injector. It is recommended to call an authorized representative. Also, make sure you are using the correct utensil size by referring to the operating instructions.
Specifies clearances and materials for safe installation.
Steps to physically place and secure the oven.
Details on connecting the appliance to gas and electricity.
Explains various cooking modes like Defrost, Conventional, Fan Forced, Grill, etc.
Explains timer buttons, LED display symbols and their functions.
Instructions for cleaning the cooktop, trivets, and burners.
To Next Page
General