To Next PageTo Next PageHow to fix Dimplex Indoor Fireplace grinding noise?
To address grinding or excessive noise with the heater off in your Dimplex Indoor Fireplace, ensure the moving flicker rod is straight and properly mounted in the bracket, spinning freely away from other components. Replace it if necessary. A defective flicker motor could also be the cause, requiring replacement.
How to fix Dimplex Indoor Fireplace heater fan that runs continuously?
If the heater fan in your Dimplex Indoor Fireplace runs continuously, the heater on/off switch is likely defective and needs to be replaced.
What to do if my Dimplex Indoor Fireplace does not turn on with remote control?
If your Dimplex Indoor Fireplace does not turn on with the remote control, ensure proper operation. Also, the remote control might not be initialized to the fireplace, so initialize it. If that doesn't work, the remote control might be defective. Install a new battery into the remote control and reinitialize the remote where necessary. Lastly, a defective Remote Control Receiver could be the problem, so replace it.
Why is the heating element glowing red in my Dimplex Indoor Fireplace?
Small glowing sections of the heating element in your Dimplex Indoor Fireplace are considered normal. However, if larger glowing sections are causing the heater to trip the thermal cutout, unplug the unit, discontinue use, and replace the heater elements.
Why is my Dimplex Indoor Fireplace heater fan turning on but there is no heat?
If the heater fan turns on but the Dimplex Indoor Fireplace lacks heat, first, ensure proper operation. Next, check for loose wiring in the unit. Finally, if the blower assembly is defective (not running when heat is activated), replace it.
General| Fuel Type | Electric |
|---|---|
| Model Number | 6900640659 |
| Voltage | 120 V |
| Flame Effect | Yes |
| Adjustable Thermostat | Yes |
| Remote Control | Yes |
| Overheat Protection | Yes |
| Product Type | Fireplace |
| Power Cord Length | 6 ft |
| Type | Electric Fireplace |
Details manual controls for units without remote.
Steps to synchronize the remote control and receiver.
How to operate the fireplace using the remote control.
Troubleshooting common problems and their solutions.
Troubleshooting steps when the flame effect is stuck.
Solutions for dim or invisible flame effects.
