5
Please read the instructions closely before rst using the product. There is also a quick-start
guide on page 10 if you need a reminder of how to use the basic functions in the future.
The heater may be used wall-mounted or freestanding. The necessary wall mounting brackets
are provided with the product as a standard. The feet screws can be bought separately as an
accessory.
It should only be operated when in the upright position as shown - see Fig.1a and Fig.1b. All
models IP20 Ingress Protected. Before connecting the heater check that the supply voltage is
the same as that stated on the heater.
General Information
To Next Page
Loading...
