Dimplex DF2524L User Manual (English)

Other manuals for Dimplex DF2524L

Questions and Answers:

J
Justin AdamsSep 7, 2025
Why is my Dimplex DF2524L making grinding noises?
- B
  Brent BrownSep 7, 2025
  If you are experiencing grinding or excessive noise with the heater off in your Dimplex Indoor Fireplace, it could be caused by the flicker rod hitting or rubbing against internal components. Ensure the rod is straight and mounted properly in the bracket, spinning freely away from other components. Replace if necessary. Alternatively, a defective flicker motor could be the cause, requiring replacement.
P
Phillip PierceSep 9, 2025
Why is the flame frozen on my Dimplex DF2524L?
- T
  twhiteSep 9, 2025
  If the flame in your Dimplex Indoor Fireplace is frozen, it could be due to loose wiring, so check the wiring connections. Another possible cause is a defective flicker motor, which would need to be replaced.
L
lori36Sep 12, 2025
Why is the flame not visible on my Dimplex DF2524L Indoor Fireplace?
- J
  James TaylorSep 12, 2025
  If the flame is not visible in your Dimplex Indoor Fireplace, check for loose wiring connections. If the wiring is secure, the LED light assembly may not be working and need replacement. In some cases, a defective display/control board can also cause this issue, requiring replacement.
S
sierra99Sep 12, 2025
Why is the flame shuddering on my Dimplex Indoor Fireplace?
- L
  Laura MedinaSep 12, 2025
  If your Dimplex Indoor Fireplace flame is shuddering, it is likely due to a defective flicker motor, which will need to be replaced.
D
David GomezSep 14, 2025
Why does the heater fan run continuously on my Dimplex Indoor Fireplace?
- R
  Richard JohnsonSep 14, 2025
  If the heater fan in your Dimplex Indoor Fireplace runs continuously, it indicates a defective heater on/off switch that needs to be replaced.