To Next PageTo Next PageWhy does the power cord get warm on my Dimplex DF2550?
It's normal for the power cord of your Dimplex Indoor Fireplace to get slightly warm when the heater is on. However, if the cord gets hot to the touch, it could indicate a defective power cord that needs to be replaced.
Is it normal for the power cord to get warm on my Dimplex DF2550?
A warm power cord on your Dimplex Indoor Fireplace can be normal when the heater is on. However, if the cord gets hot to the touch, it indicates a defective power cord, and you should replace it.
What to do if my Dimplex DF2550 does not turn on manually?
If your Dimplex Indoor Fireplace is not turning on manually, it could be due to several reasons. First, ensure proper operation. Second, check the fuse/breaker panel to make sure there is incoming power from the electrical wall socket. Third, the 3-position switch may be defective and need replacement. Finally, the Remote Control Receiver could be defective, so you should replace it and initialize the Remote Control and Receiver.
Why does my Dimplex DF2550 Indoor Fireplace turn on and off by itself?
If your Dimplex Indoor Fireplace turns on or off by itself, it might be due to a few reasons. The remote control may have a similar frequency to other remotes in the area, in which case you should replace the remote control and initialize it to the Remote Control Receiver. Also, there could be radio frequency disturbance from outside sources, requiring replacement of the Remote Control and Remote Control Receiver, followed by initialization. Lastly, a defective Remote Control Receiver can cause this issue, so replacing it and initializing the Remote Control and Receiver may resolve the problem.
Why is my Dimplex DF2550 Indoor Fireplace making excessive noise when the heater is on?
If there is excessive noise when the heater is on in your Dimplex Indoor Fireplace, it could be due to a dirty Heater Assembly. Ensure that the exterior intake louvers and firebox cavity are free of dirt and dust. Another possibility is a defective Heater Assembly, which would need to be replaced.
Why is the log set dim in my Dimplex DF2550 BF9000?
If the log set in your Dimplex Indoor Fireplace (BF9000 model) is dim and not glowing, check the wiring connections for any looseness. It could also be due to a defective LED Log Driver Board or a defective Log Set Assembly, both of which would need to be replaced.
What causes the flame shutter to malfunction on my Dimplex DF2550 Indoor Fireplace?
If the flame shutter is not working on your Dimplex Indoor Fireplace, it could be due to a defective Flicker Motor, which needs to be replaced.
Why is light leaking around the log set of my Dimplex DF2550 Indoor Fireplace?
If you notice light leaking around the log set of your Dimplex Indoor Fireplace, it is likely that the log set is not positioned properly. Check the log set for proper fit.
Why does the heater fan run continuously on my Dimplex DF2550?
If the heater fan in your Dimplex Indoor Fireplace runs continuously, it could be due to a defective Heater Switch, a defective Thermostat, or a defective Heater Assembly. In each case, the suggested solution is to replace the defective part.
Why does my Dimplex DF2550 Indoor Fireplace heater emit an odor?
If your Dimplex Indoor Fireplace heater emits an odor, it is often normal when the heater is initially turned on, as it burns off dust accumulated during manufacturing or operation. However, it can also indicate a defective Heater Assembly, which would need replacement.
General| Brand | Dimplex |
|---|---|
| Model | DF2550 |
| Category | Indoor Fireplace |
| Language | English |
Users are advised to carefully read and save all provided instructions before use.
Record your model and serial numbers for future reference on the provided label.
Covers safe operation, avoiding burns, keeping combustibles away, and supervision.
Instructions on unplugging, handling damaged cords, and proper electrical connections.
Specifies not to use outdoors, in bathrooms, or near water sources.
Guidance on not blocking air intake/exhaust and preventing foreign objects entry.
Covers not burning wood, not modifying the fireplace, and avoiding flammable vapors.
Guidelines on extension cord use, gauge, wattage, and using certified electricians.
Instructions on not striking glass, disconnecting power for cleaning, and storage.
Details FCC rules for Class B digital devices and measures to correct interference.
Specifies 15 Amp, 120 Volt circuit requirement and power cord safety warnings.
Guidance on choosing a suitable location away from moisture, drapes, and high traffic.
Provides the fireplace dimensions and notes that no additional venting is required.
Instructions for installing into a mantel and reiterates circuit requirements.
Steps for framing an opening and selecting a location for installation in a new wall.
Details options for routing the power cord to an outlet, including extension cord use.
Details wiring a dedicated circuit and using appropriate non-metallic sheath cable.
Step-by-step guide for connecting power supply wires to the fireplace junction box.
Explains the two positions for manual and remote control operation of the unit.
Details how to operate the heater and adjust the temperature using the thermostat.
Instructions for setting room temperature and resetting the overheat cutoff switch.
How to use the remote control and replace its battery for fireplace operation.
Steps to re-initialize the remote control transmitter and fireplace receiver.
Guidance on contacting customer service if remote control issues persist.
Instructions for safely replacing fireplace light bulbs and their requirements.
Step-by-step guide to access and replace bulbs in the lower section of the fireplace.
Procedure for replacing the log set and ensuring proper installation for light sealing.
Guidelines for cleaning the front glass and exterior finish without scratching.
Details warranty coverage, applicable regions, and transferability for the electric fireplace.
Lists items not covered by warranty and conditions for products sold 'as is'.
Defines warranty duration for fireplace and surrounds, and types of services provided.
Lists conditions like misuse, abuse, or unauthorized alteration that void the warranty.
Instructions on how to contact Dimplex and what information is needed for warranty service.
Details Dimplex's options for repair, replacement, or refund for defective products.
Outlines purchaser's duties regarding access, shipping costs, and labor for warranty services.
Excludes liability for indirect, special, or consequential damages beyond product price.
Explains how state and provincial laws grant specific legal rights and may vary.
