Operation
Electric Fireplace Manual
Controls
A. Main On/Off Switch
Supplies power to the 3
B. 3 Position Manual Control
Switch
Remote (right position):
The unit is operated with the
Flame (center position): The
Flame & Heat (left position):
in the Flame & Heat position
the heater does not run on the
C. Initialization Button
!
NOTE: When the manual
Flame
and Flame & Heat
operate with the remote
Resetting The
Temperature Cutoff
Switch
will turn the heater off and it will
CAUTION: If you need to
Figure 3
A
B
To Next Page
Loading...
