EasyManuals Logo

Dimplex DGR32WNG User Manual

Dimplex DGR32WNG
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
WARNING
Failure to read and follow the Operation instructions could result in a fire or explosion that could
cause serious bodily injury, death or property damage.
If you have a gas leak that cannot be repaired by tightening, turn off the gas at the source, disconnect fuel
line from your heater and call Technical Support or your gas supplier for assistance.
Inspect the heater and connections before each use. You should perform periodic maintenance and
cleaning on the heater (refer to Maintenance section.) The heater should be inspected and serviced
annually by a qualied technician.
Checking for Gas Leaks
WARNING: Never test for leaks with an open ame.
Prior to rst use and at the beginning of each season, you
must check for gas leaks. Follow these three steps:
1. Make a soap solution by mixing one part liquid
detergent and four parts water. (Figure 11)
2. Pull the black cord (off) until a ‘click’ is heard to ensure
the heater is off. (Figure 12)
3. Turn on gas at the source.
4. Apply the soap solution to all visible gas connections.
If bubbles appear in the soap solution the connections
are not properly sealed. Check each tting and tighten
or repair as necessary. (Figure 13)
1 part liquid detergent
Natural Gas
Turn On
(Red)
Turn Off
(Black)
4 parts water
Figure11
Operation
Figure12
Figure13

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dimplex DGR32WNG and is the answer not in the manual?

Dimplex DGR32WNG Specifications

General IconGeneral
BrandDimplex
ModelDGR32WNG
CategoryHeater
LanguageEnglish

Related product manuals