is free from debris and packaging
remnants.
② Place unit on oor in desired
location.
WARNING: Keep combustible
materials, such as furniture,
pillows, bedding, papers,
clothes, and curtains at least
3 feet (0.9 m) from the front
of the heater and keep them
Stove Installation
away from the sides and rear.
③ Make sure the unit's Main On/
Off switch is switched Off (refer to
operating instruction section).
④ Plug the unit into a 15 Amp,
120 VAC outlet. If the cord does
not reach, you may use a No. 14
AWG minimum size extension
cord rated for a minimum of 1875
Watts.
Operation
This section will describe each
convenient control, located on the
back of the stove (Figure 1).
A. Main On/Off Switch
Controls the electricity supply to
the stove and activates the
ame effect only when on.
B. Low Heat On/Off Switch
Provides 600 Watt heat output.
C. High Heat On/Off Switch
Provides 1200 Watt heat output
with the Low Heat Switch.
Figure 1
A B C
To Next Page
Loading...
Need help?
General
