Thermostat
O/Heat selection
switch
Neon Indicator
Timer
Cable Wrap
Turbo
Turbo
Switch
Operation
IMPORTANT - OBJECTS OR CLOTHING MUST NOT BE PLACED ON THIS HEATER.
Before using the heater ensure that all warnings and instructions have been read
carefully. To activate the heater simply plug it in. Neon indicator lights located at
the control area will illuminate when the appliance is plugged into the mains. This
indicates the appliance is energised and ready to use.
Please note – The element has been coated with a protective lm which will burn o
during the rst few minutes of use, this may cause a small amount of fuming. This is
quite normal – the fumes are non-toxic and will quickly disappear.
We recommend that you open a window to ventilate the room when using the
heater for the rst time.
CONTROLS
Fig. 2
Fig. 3
8
To Next Page
Loading...
