11
Remote Control Operation
The remote control may be
operated once the appliance is
switched to the ON "I" position
(Figure 2A).
Aim the remote control at the IR
remote sensor located on the
left of the display
(Figure 2). The
volume may be adjusted up or
down by pressing the volume
control buttons ( + and -).
Battery Replacement
!
NOTE: The remote control
is packed separately in the
carton.
1. Slide battery cover open on
the remote control (Figure 3).
2. Correctly install 2 1.5 Volt
(AAA) battery in the battery
holder.
3. Close the battery cover.
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or Retailer for recycling
advice in your area.
Standby
Button
Battery
Cover
Volume
Controls
Figure 3
Operation
To Next Page
Loading...
Need help?
General
