To Next PageTo Next PageWhat to do if Dimplex Indoor Fireplace shows error E3?
If your Dimplex Indoor Fireplace displays error code E3, it indicates that the vents may be dirty or clogged. To resolve this, unplug the power, carefully clean any dust and debris from the vent area. After cleaning, wait for 5 minutes before plugging the unit back in and turning on the heater. If the error persists after these steps, further assistance is needed.
Why does my Dimplex Indoor Fireplace show error E1?
Error code E1 on your Dimplex Indoor Fireplace indicates that the heater is overheating.
Essential safety guidelines for operating the electric fireplace to prevent injury and damage.
Further safety advice covering cord placement, electrical connections, ventilation, and remote control handling.
Crucial guidance on properly grounding the electric fireplace for safe operation.
Warning regarding electrical outlet wiring compliance with building codes for safety.
Detailed instructions and dimensions for installing the fireplace within a wall.
Step-by-step guide for mounting the fireplace onto a wall surface.
Instructions for setting up the fireplace on a table or flat surface.
Critical warnings about electrical repairs and disconnecting power before maintenance.
Essential safety guidelines for operating the electric fireplace to prevent injury and damage.
Further safety advice covering cord placement, electrical connections, ventilation, and remote control handling.
Crucial guidance on properly grounding the electric fireplace for safe operation.
Warning regarding electrical outlet wiring compliance with building codes for safety.
Detailed instructions and dimensions for installing the fireplace within a wall.
Step-by-step guide for mounting the fireplace onto a wall surface.
Instructions for setting up the fireplace on a table or flat surface.
Critical warnings about electrical repairs and disconnecting power before maintenance.
General| Model | Sierra 72 |
|---|---|
| Type | Electric Fireplace |
| Width | 72 inches |
| Power Supply | 120V |
| Power Consumption | 1500W |
| Heating Area | Up to 400 sq ft |
| Adjustable Flame Brightness | Yes |
| Remote Control | Yes |
| Built-in Thermostat | Yes |
| Overheat Protection | Yes |
