13
Programming Number of Carts Displayed and Speaker
1) Press the “PROGRAM” key
2) Display will prompt:
Select:
Program Meal Times
Configure Unit
3) Use the “ “ keys to highlight “Configure Unit”.
4) Press the “YES” key to select.
5) Enter pass code “15037” on the keypad.
6) Display will prompt:
Select:
System Setup
Set Meal Parameters
Set Pass codes
Set Time of Day
Reset
7) Use the “ “ keys to highlight “System Setup”.
8) Press the “YES” key to select.
9) Display will prompt:
System Setup
Number of Carts: 8
Alarm : ON/OFF
Key Click: ON/OFF
10) Use the keypad to enter the number of carts to be displayed (1-8).
11) Use the “ “ keys to change the Alarm to ON/OFF setting.
12) Press the “SAVE” key to store the change(s).
13) Press the “CANCEL” key to exit programming.
To Next Page
Loading...
