19
4) Press the “YES” key to select.
5) Enter pass code “4444” on the keypad.
6) Display will prompt:
Select:
Program Meals
Copy Meals
7) Use the “ “ keys to highlight “Program Meals”.
8) Press the “YES” key to select.
9) Display will prompt:
Select Cart:
1 2 3 4 5 6 7 8
10) Use the “ “ keys to highlight the cart you would like to program.
11) Press the “YES” key to select.
12) Display will prompt:
Meal 2nd Cart
Breakfast --:-- --:--
Lunch --:-- --:--
Dinner --:-- --:--
13) Use the keyboard to enter meal times. The cursor will automatically jump from field to
field. Use the “ “ keys for extra mobility. The “NO” key may be used to
remove existing meal times.
14) Press the “SAVE” key to store the change(s).
15) Press the “CANCEL” key to exit programming or repeat steps 6-14 for the next cart.
IMPORTANT: The Perfect Temp cart must be hooked up to the drop cord 15 minutes prior
to the start of the cycle. Failure to do so may cause the Station Commander to not recognize
that the cart is plugged in, and may not start.
To Next Page
Loading...
