50
Products such as Dip-It by Economics Laboratories, or Nuware by Dubois Chemicals
are commercially available. Directions for proper formulization and use are provided by the
manufacturer.
Perfect•Temp Cart Sanitation and Cleaning
The Perfect•Temp cart has been designed to withstand mild detergent cleaning and
other non-steam-generating wash operations.
Regardless of the cleaning system used, all detergents and sanitizing agents must be
selected carefully to assure compatibility with aluminum and silicone materials.
After completing the washing operation, allow the Perfect•Temp cart to air dry
thoroughly before returning it to food service. If air drying (either passive or forced) is
inappropriate, then a complete hand wiping with a clean, soft cloth is recommended.
NOTE: Discoloration of cart finish is not the basis for a warranty claim. Final
liability for detergent/sanitizer selection remains entirely with the customer.
Minimum daily cleaning recommendations are to hand wipe specific spill areas and
hand dry.
Minimum weekly cleaning recommendations are to hand wash completely with both
detergent and sanitizer and dry thoroughly.
Cleaning of nonstick heater pad coatings should be limited to soft cloth wipedown.
Abrasive cleaners or cloths will scratch the nonstick surface and compromise the
effectiveness of the coating.
The use of scrapers, scratchers or sharp items not only will affect the appearance of
the Perfect•Temp cart, but also may void the warranty. Use of a soft nylon brush is strongly
recommended.
To Next Page
Loading...
