DINGLI BA28RT - Page 19

Specification
15
Firing Order
1-3-4-2
Low idle
900r/min
Governor
Electric
Lubrication System
Oil Pressure (Low idle, Engine Warm)
140 kPa/1.4bar
Oil Capacity (without/with filter)
9L
Oil Temperature in the lube oil Tray, maximum
125℃
Unit ships with 15W-40 oil, Extreme operating temperatures may require the use of alternative
engine oils. Please refer the Engine Operator Manual for detail.
Fuel Requirement
The fuel added in should be satisfied with EN590. Refer to engine manual operation when the
local environment changes.
Engine Coolant
Type of cooling
water cooling
Capacity
3.5L
V-belt tension (width 10mm)
Pre-tensioning/Re-tensioning
650±50/400±50N
Oil and Coolant Fluid Capacity Table
Item
Name
mode
Dosage
Remark
1
Engine oil
Mobil 15W-40
9L
2
coolant
20L
3
wheel reduction oil
moderate
4
differential oil
moderate
5
grease or oil for
lubricating rotating
parts
moderate
refer to the chapter of lubrication
6
Hydraulic oil
145L
confirm to change the oil according
to the local environment
7
Diesels
120L
be satisfied with EN590