Important
Read, understand and observe the following
safety regulations and operating instructions
before using the machine. The machine must
be used only by qualified and authorized
personnel. This Manual is an integral part of
the machine and must always be kept safe in
the machine. In case of doubt, contact DINGLI
at the address shown below.
Identification of the Manual
The identification code of the Manual is shown
on the cover; it is advisable to note this down
in the Inspection Register.
If the Manual is lost, to request a new Manual,
mention the code on the cover or the
manufacturing number of the machine.
It is advisable to mention the machine
manufacturing number on the cover in such a
way as to clearly identify the Manual with the
machine.
Zhejiang Dingli Machinery Co., Ltd.
1255 Baiyun South Road. Leidian Town.
Deqing Zhejiang
China
Tel: +86-572-8681688
Fax: +86-572-8681690
Web: www.cndingli.com
E-mail:market@cndingli.com
Contents
Marking..............................................................1
Introduction.......................................................2
Personnel safety..............................................4
Work Area Safety............................................ 5
Legend............................................................ 11
Specification...................................................12
Controls...........................................................20
Placards and Decals.....................................28
Pre-operative Inspections............................33
Workplace Inspection................................... 35
Functional Tests............................................ 36
Operating Instructions.................................. 40
Instructions for Transport.............................44
Maintenance...................................................47
Schematic.......................................................73
Inspection Register....................................... 80
To Next Page
Loading...
