DINGLI JCPT2223RTB User Manual

OPERATOR’S MANUAL with Maintenance Information
Pre-operation Inspection
21
Pre-operation Inspection
 Be sure that the operator’s manual are
complete, legible and in the storage
container located in the platform.
 Be sure that all decals are legible and in
place. See Decals section.
 Check for engine oil leaks and proper oil
level. Add oil if needed. See Maintenance
section.
 Check for hydraulic oil leaks and proper oil
level. Add oil if needed. See Maintenance
section.
 Check for engine coolant leaks and proper
level of coolant. Add coolant if needed.
See Maintenance section.
 Check for battery fluid leaks and proper
fluid level. Add distilled water if needed.
See Maintenance section.
Check the following components or areas for
damage, improperly installed or missing parts
and unauthorized modifications:
□ Electrical components, wiring and
electrical cables
□ Hydraulic hoses, fittings, cylinders and
manifolds
□ Fuel and hydraulic tanks
□ Drive motors
□ Wear pads
□ Tires and wheels
□ Engine and related components
□ Limit switches, alarms and horn
□ Nuts, bolts and other fasteners
□ Platform overload components
□ Platform entry gate
□ Beacon (if equipped)
□ Safety arm
□ Platform extension(s)
□ Scissor pins and retaining fasteners
□ Platform control joystick
□ Oscillate Axle
□ Differential lock
□ Outrigger housings and footpads
Check entire machine for:
□ Cracks in welds or structural
components
□ Dents or damage to machine
□ Be sure that all structural and other
critical components are present and
all associated fasteners and pins are
in place and properly tightened
Note: If the platform must be raised to inspect
the machine, make sure the safety arm is in
place. See Operating Instructions section.

DINGLI JCPT2223RTB Specifications

General

Brand	DINGLI
Model	JCPT2223RTB
Category	Scissor Lifts
Language	English