OPERATOR’S MANUAL with Maintenance Information
Maintenance
54
B-12
Lubrication
Dingli requires that this procedure be
performed every 250 hours or quarterly,
whichever comes first.
Good lubrication is essential to machine
performance and service life. Failure to
lubricate may cause the machine to perform
poorly and continued use may cause
component damage.
Lubrication involves:
• The lubricating points on the scissor joints
• The lubricating points on the chassis.
• The lubricating points on the platform
The following points must be lubricated on
the scissor joint in particular:
• Scissor shaft
• Sliding blocks
The following points must be lubricated on
the chassis in particular:
• Steering
• Steering cylinder
• lifting cylinder
• Sliding tracks of the sliding blocks
The following points must be lubricated on
the platform in particular:
• Sliding blocks - sliding tracks
• Guide rollers of the platform extension
To Next Page
Loading...
