OPERATOR’S MANUAL with Maintenance Information
Maintenance
59
9 Lift the wheels off the ground and place
blocks under the drive chassis for support.
Crushing hazard. The
chassis could fall if not properly supported.
10 Release the brake.
11 Manually rotate each front wheel.
⊙ Result: Each wheel should rotate with
minimum effort.
12 Reset the brake. Rotate each wheel to
check for engagement. Raise the machine
and remove the blocks. Lower the
machine.
D-3
Perform Engine Maintenance
Engine specifications require that this
procedure be performed every 1000 hours or
annually, whichever comes first.
Required maintenance procedures and
additional engine information is available in the
engine operator’s manual.
To Next Page
Loading...
