DINGLI JCPT2223RTB - Page 70

OPERATOR’S MANUAL with Maintenance Information
Maintenance
65
Display
for
Platform
Display for Ground
Description
Repair
86
86 Outrigger Ret Coil Fit
Power FET, channel RETRACT
OUTRIGGER fails
check the wiring,
replace the valve
93
93 Drive Fwd Prop Coil
Fault
Drive Forward Prop Coil Fault
check the wiring,
replace the valve
94
94 Drive Rev Prop Coil Fault
Drive reverse Prop Coil Fault
check the wiring,
replace the valve
95
95 Machine Type Fauit
Wrong Machine Type Selected
Reinstall Machine
Type
OL
98 Platform Overload
Platform Overload Fault
Remove the excess
load immediately.
LL
Machine Tilted Beyond Safe
Limits Fault
check the wiring,
replace the sensor
For more information, please consult the appropriate Dingli Service Dept.