OPERATOR’S MANUAL with Maintenance Information
Specifications
22
Model: S0608E
Height, working maximum 8 m
Height, platform maximum 6 m
Height, stowed maximum
Rails up
2.23 m
Height, stowed maximum
Rails folded
1.87 m
Width 0.83 m
Length, platform retracted 2.48 m
Length, platform extended 3.38 m
Platform dimensions
Platform length × width
2.27×0.81 m
Platform extension length 0.9 m
Maximum load capacity 380 kg
Maximum wind speed 12.5 m/s
Wheelbase 1.87 m
Turning radius (outside) 2.1 m
Turning radius (inside) 0 m
Ground clearance 10 cm
Ground clearance
Pothole guards deployed
1.9 cm
Weight
（See Serial Label）
Machine weights vary with option configurations
Power source 4 Batteries , 6V 225AH
Controls Proportional
AC outlet in platform Standard
Maximum hydraulic pressure
(functions)
240 bar
System voltage 24 V
Tire size Φ381×127 mm
Airborne noise emissions <70 dB
Maximum sound level at normal operating
workstations (A-weighted)
Vibration value does not exceed 2.5m/s
Maximum slope rating,
Stowed position
25%
Maximum side slope rating,
Stowed position
25%
Note: Slope rating is subject to ground
conditions and adequate traction.
Maximum working slope X-1.5°,Y-3°
Drive speeds
Stowed, maximum 4.0 km/h
Platform raised, maximum 0.8 km/h
Floor loading information
Tire load, maximum 1000 kg
Tire contact pressure 11.3 kg/cm
1104.6 kPa
Occupied floor pressure 1360.7 kg/m
13.3 kPa
Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with
ade
uate safet
factors.
Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.
To Next Page
Loading...
