EasyManua.ls Logo

DINGLI SL1323-AWD - Specifications

DINGLI SL1323-AWD
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATOR’S MANUAL with Maintenance Information
Specifications
14
Model SL1323-AWD
Height, working maximum 15m
Height, platform maximum 13m
Height, stowed maximum
Rails up
2.98m
Height, stowed maximum
Rails folded
2.28m
Width, standard tires 2.3m
Length, platform retracted
Models with one extension deck
3.94m
Length, platform extended
Models with one extension deck
5.4m
Length, platform retracted
Models with two extension decks
3.98m
Length, platform extended
Models with two extension decks
6.6m
Length, platform retracted
Models with outriggers
4.88m
Platform dimensions
Platform length × width
3.98m×1.81m
Platform extension length 1.52m, 1.22m
Maximum load capacity 680kg
Maximum wind speed 12.5m/s
Wheelbase 2.86m
Turning radius (outside) 5.2m
Turning radius (inside) 2.04m
Ground clearance 22cm
Weight See Serial Label
Machine weights vary with option configurations
Controls Proportional
AC outlet in platform Standard
Maximum hydraulic pressure
(functions)
240bar
Tire size - standard tires 33×12-20
Airborne noise emissions <80dB
Maximum sound level at normal operating
workstations (A-weighted)
Gradeability 50%
Maximum working slope X-2°,Y-3°
Drive speeds
Stowed, maximum 6km/h
Platform raised, maximum 1.1km/h
Floor loading information
Tire load, maximum 2550kg
Outrigger load, maximum
(if equipped)
2550kg
Tire contact pressure
8.80kg/cm
2
862kPa
Occupied floor pressure
735kg/m
2
7.21kPa
Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with
adequate safety factors.
Continuous improvement of our products is a
policy. Product specifications are subject to
change without notice or obligation.

Related product manuals