OPERATOR’S MANUAL with Maintenance Information
Control Panel
17
Ground Control Panel
1 Display
Diagnostic readout
2 Engine idle select button
Press this button to select the engine idle
setting. Light on indicates high idle is
selected. Light off indicates low idle is
selected.
3 Overload indicator light
Light on indicates when overloaded.
4 Engine start button
Press this button to start the engine.
5 Engine glow plug button
Press and hold this button to preheat
engine.
6 Hour meter
The hour meter displays the number of
hours the machine has operated.
7 Key switch
Turn the key switch to the platform position
and the platform controls will operate.
Turn the key switch to the off position and
the machine will be off. Turn the key switch
to the base position and the ground controls
will operate.
8 Red Emergency Stop button
Push in the red Emergency Stop button to
the off position to stop all functions. Turn the
red Emergency Stop button clockwise to the
on position to operate the machine.
9 Platform down button
Press this button and the platform will lower
10 Lift function enable button
Press this button to activate the lift function.
11 Emergency lowering down button
Press this button and the platform will lower
12 Platform up button
Press this button and the platform will lift.
13 Emergency lowering down enable button
Press this button to activate the Emergency
down function.
To Next Page
Loading...
