EasyManua.ls Logo

Dini Argeo WIFITD-1 - User Manual

Dini Argeo WIFITD-1
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
WIFITD-1
USER MANUAL
Manual_WIFITD_V2
Question and Answer IconNeed help?

Do you have a question about the Dini Argeo WIFITD-1 and is the answer not in the manual?

Summary

Connection to the board

Through WiFi

Connect to the board wirelessly by selecting the available WiFi network.

Through Ethernet Cable

Establish connection using a direct Ethernet cable between the board and your PC.

Modify PC Ethernet Board for Cable Connection

Temporarily modify PC's LAN board IP settings for Ethernet connection.

Access to the configuration page

Default IP Address and Login Credentials

Use the default IP address 192.168.16.254 and credentials to access the configuration interface.

Main Configuration

Mode of Operation

Select the operational mode for the board, such as WIFI (CLIENT) or SERIAL.

SSID and Password Configuration

Configure the WiFi network's SSID and password for connection.

Dynamic IP Settings

Configure the board to obtain an IP address automatically via DHCP.

Static IP Settings

Manually assign a specific IP address, Subnet Mask, and Gateway.

Serial Configuration

Set serial parameters such as baud rate, data bits, parity, and stop bits.

Protocol and Port Number

Select communication protocol (TCP/UDP) and configure the access port number.

Password Management

Configure the administrator account and password for system access.

Factory Reset

Summary

Connection to the board

Through WiFi

Connect to the board wirelessly by selecting the available WiFi network.

Through Ethernet Cable

Establish connection using a direct Ethernet cable between the board and your PC.

Modify PC Ethernet Board for Cable Connection

Temporarily modify PC's LAN board IP settings for Ethernet connection.

Access to the configuration page

Default IP Address and Login Credentials

Use the default IP address 192.168.16.254 and credentials to access the configuration interface.

Main Configuration

Mode of Operation

Select the operational mode for the board, such as WIFI (CLIENT) or SERIAL.

SSID and Password Configuration

Configure the WiFi network's SSID and password for connection.

Dynamic IP Settings

Configure the board to obtain an IP address automatically via DHCP.

Static IP Settings

Manually assign a specific IP address, Subnet Mask, and Gateway.

Serial Configuration

Set serial parameters such as baud rate, data bits, parity, and stop bits.

Protocol and Port Number

Select communication protocol (TCP/UDP) and configure the access port number.

Password Management

Configure the administrator account and password for system access.

Factory Reset

Dini Argeo WIFITD-1 Specifications

General IconGeneral
ModelWIFITD-1
BrandDini Argeo
WirelessWi-Fi IEEE 802.11b/g/n
Form FactorMini-ITX
SocketLGA 1151
ChipsetIntel H110
Memory Slots2
Max Memory32GB
Storage4x SATA 6Gb/s
Expansion Slots1x PCIe 3.0 x16
USB Ports4x USB 3.0, 2x USB 2.0
Video Outputs1x HDMI, 1x DVI-D
AudioRealtek ALC887