EasyManua.ls Logo

DINKING DK3300i - Pre-Operation Preparations; Fueling Procedures and Safety; Oil Filling Procedure

DINKING DK3300i
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
IV. Preparations
1Fuel
DANGER
Fuel is flammable and toxic, please read the Safety Instruction
carefully before refueling;
Do not fuel too full, otherwise fuel will spill after fuel tank is warmed;
After refueling, confirm that the fuel tank cap has been tightened.
ATTENTION
After refueling, dry gasoline residue with a clean and soft cloth in
time to avoid damaging plastic enclosure;
Unleaded gasoline must be used, as
leaded gasoline can seriously damage
internal parts of the generator;
Remove fuel tank cap, and add gasoline
to red horizontal indicating line oil level.
Fuel tank capacity: 4L
2Oil
No oil is filled into this generator when being delivered. Do not start up the
generator without filling sufficient oil.
1
Please place the generator onto a horizontal plane surface;
2
Unscrew the knob to remove oil cover plate ;
3
Unscrew oil dipstick ;
4
Fill in 0.35L oil (SAE 10W/30 oil is recommended, of which the
grade is API standard Type SE or higher);
5
Reassemble oil cover plate and tighten the knob.

Related product manuals